Thoughts on using DCC for the first time user
by Jim Quarles
Things to know about DCC in general when you pick up the throttle the first time.
- Power to the track is turned on using a TWO STEP process. Simply flipping a switch on a power pack isn't enough now.
- Because each loco is independently controllable, they HAVE to be SELECTED or ACQUIRED before you can control them with a throttle.
- When you are done using a loco it's a good idea to RELEASE it so other operators can acquire it for their use.
- Multiple unit CONSISTS of locos are built using throttles, likewise they have to be broken down using a throttle.
- You can assign (or DISPATCH) a loco or consist of locos for use by other throttles.
Index of articles covering these subjects
Disclaimer for new members and guests
Using the UT-1 Digitrax Throttle
Using the UT-2 Digitrax Throttle
Using the DT-100 Digitrax Throttle
Using the DT-300 Digitrax Throttle
Using the DT-400 Digitrax Throttle
Releasing a loco address
Consisting
Power Districts
A way of fixing an error that sometimes comes up for me
Information contained in this web site is a compilation of information created for members using Digitrax manuals, documents and other information gathered from various places.
Disclaimer
The author or OMRA (Ozarks Model Railroader Association) can not be held responsible in ANY way for the contents - these documents are offered for use of the membership of the OMRA to enhance their knowledge of the products used by the OMRA in the operation of their equipment on the club layout.
Revised: November 15, 2007